====== Troubleshooting ======

[[:faq|Frequently Asked Questions section]] - useful for initial setup

----


  * [[troubleshooting:hardware_checklist|Hardware Troubleshooting Checklist]]

  * [[troubleshooting:no_connection|No Connection between myCNC controller and a Host computer]]
    * [[quickstart:mycnc-quick-start:network-setup|Network Setup - General Setup Tips]]
    * [[mycnc:change_ip_address_of_mycnc_control_board|How to change IP Address of myCNC control board - Linux]]
    * [[mycnc:change_ip_address_of_single_board_computer_sbc|How to change IP address for an Ubuntu MATE Computer]]
    * [[mycnc:change_ip_address_for_tinkerboard_sbc|How to change IP Address for TinkerBoard SBC]]
    * [[troubleshooting:no_connection:windows7|How to set up connection with a Windows computer]]

  * [[troubleshooting:change_profile|How to change profile from Linux Desktop]]

  * [[troubleshooting:restore_profile|How to restore profiles]]

  * [[troubleshooting:rollback_mycnc|How to rollback to a previous version of myCNC software]]

  * [[troubleshooting:thc_troubleshooting|THC Troubleshooting]]

  * [[troubleshooting:camera_troubleshooting|Camera Troubleshooting]]

  * [[troubleshooting:File_System_check|File System Checkup (The software does not start)]]

  * [[troubleshooting:overlayroot_read_only|Changing read-only system behaviour]]