AB-cut widget helps to make a straight cut by given 2 points.
Start Position - A-point is the Current Tool Position (A-point coordinates are equal to current Work coordinates).
Finish Position- B-point is a point defined by an operator. There are 2 methods to define B-point
-
Jog to Finish position and press the “SET” button to assign this position as the
B-point
A complete sequence for method 1 is -
Jog to the Start Position (A-point)
Click on X coordinate for B-point and enter a coordinate you need for the Finish B-point X, press OK
Click on Y coordinate for B-point and enter a coordinate you need for the Finish B-point Y, press OK
Click
AB-CUT to start straight cut
from A to B, press OK to confirm the operation
A complete sequence for method 2 is -
Jog to the Finish Position (B-point)
Click SET to assign the current position as B-point
Jog to the Start Position
Click AB-CUT to start straight cut from A to B, press OK to confirm the operation
A video on AB Cut functionality is available here:
NOTE: The video above is recorded using the X1366P plasma cutting profile, however the functionality is the same for the X1366G gas cutting profile series.