Triggers/Timers

Main window: Basic functions:

• To activate the trigger , it is necessary to check the box next to number of trigger:
• Then select the type of triggering the trigger.
• Faling Edge - Trigger triggering on the falling edge of the impulse, i.e. when passing from the upper state (“1”) to the lower state (“0”).
• Rising Edge - Trigger triggering on the rising edge of the impulse, i.e. when passing from the lower state (“0”) to the upper state (“1”).
• After tripping, you can select the controller's output
• You can also choose to start the necessary procedure for triggering the trigger

• To activate the timer , it is necessary to check the box next to number of timer:
• After activating the timer, it is necessary to select the operating output of the controller
• You must select the duration of the output pulse and the length of the pause. Values are set in ms:

Timer 0 schedule Timer 1 schedule