User Tools

Site Tools


faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
faq [2020/05/18 11:05] ivanfaq [2020/06/05 13:10] ivan
Line 321: Line 321:
   * Check that the reference voltage has been chosen correctly   * Check that the reference voltage has been chosen correctly
 {{hardware:thc:mycnc-thc-012.png}} {{hardware:thc:mycnc-thc-012.png}}
-  * In Settings > Config > Technology > THC, check that the Alarm Arc Voltage Difference and Alarm Arc Voltage Rise aren't set to a value that's too low - in cases where the reference and the measured voltage are too different, a small value of the Alarm Arc Voltage Difference will prevent the THC system from starting. Set the value to 1000 to temporarily disable this feature. +  * In Settings > Config > Technology > THC, check that the Alarm Arc Voltage Difference and Alarm Arc Voltage Rise aren't set to a value that's too low - in cases where the difference between reference and measured voltage is too great, a small value of the Alarm Arc Voltage Difference will prevent the THC system from starting. Set the value to 1000 to temporarily disable this feature. 
 {{:thc:thc-setup-008-arc-alarm.png}} {{:thc:thc-setup-008-arc-alarm.png}}
   * Check that THC is enabled in the User Settings   * Check that THC is enabled in the User Settings
faq.txt · Last modified: 2024/02/20 10:07 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki