User Tools

Site Tools


mycnc:adc_mapping

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
mycnc:adc_mapping [2018/09/13 03:42] pupalaisermycnc:adc_mapping [2018/09/13 03:46] (current) pupalaiser
Line 12: Line 12:
   * Setting channel number 5 of the ADC   * Setting channel number 5 of the ADC
 {{ :mycnc:mapping_5.jpg?nolink& |}} {{ :mycnc:mapping_5.jpg?nolink& |}}
-If it is necessary to invert the value of the sensor, simply check the check box for the desired inversion.Inversion can be useful if, for example, the value from the sensor increases as the distance decreases, but it is necessary that the value of the sensor decreases when the distance is changed.+  * If it is necessary to invert the value of the sensor, simply check the check box for the desired inversion.Inversion can be useful if, for example, the value from the sensor increases as the distance decreases, but it is necessary that the value of the sensor decreases when the distance is changed.
 {{ :mycnc:mapping_4.jpg?nolink& |}} {{ :mycnc:mapping_4.jpg?nolink& |}}
  
mycnc/adc_mapping.txt · Last modified: 2018/09/13 03:46 by pupalaiser

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki