User Tools

Site Tools


mycnc:closed_loop_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
mycnc:closed_loop_configuration [2019/10/21 09:53] ivanmycnc:closed_loop_configuration [2019/11/05 08:54] (current) ivan
Line 1: Line 1:
 ===== MyCNC closed loop configuration ===== ===== MyCNC closed loop configuration =====
  
-A proportional–integral–derivative controller (PID controller) is a control loop feedback mechanism widely used in industrial control systems and a variety of other applications requiring continuously modulated control. A PID controller continuously calculates an error value E(t) as the difference between the desired setpoint position (POS) and a real position measured by encoders (ENC) and applies a correction based on proportional, integral, and derivative terms (denoted P, I, and D respectively). +A proportional–integral–derivative controller (PID controller) is a control loop feedback mechanism widely used in industrial control systems and a variety of other applications requiring continuously modulated control. A PID controller continuously calculates an error value E(t) as the difference between the desired setpoint position (POS) and a real position measured by [[mycnc:rotary_encoder_connection_and_setup|encoders]] (ENC) and applies a correction based on proportional, integral, and derivative terms (denoted P, I, and D respectively). 
  
  
mycnc/closed_loop_configuration.txt · Last modified: 2019/11/05 08:54 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki