mycnc:gcodes_list
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
mycnc:gcodes_list [2019/09/26 10:57] – ivan | mycnc:gcodes_list [2019/09/26 15:51] – ivan | ||
---|---|---|---|
Line 5: | Line 5: | ||
^ G-codes ^^^^ | ^ G-codes ^^^^ | ||
^ Code ^ Description ^ Mill (M)\\ Lathe(L)\\ Cutting table (C) ^ Comments ^ | ^ Code ^ Description ^ Mill (M)\\ Lathe(L)\\ Cutting table (C) ^ Comments ^ | ||
- | | G00 | Rapid Positioning | | + | | G00 | Rapid Positioning |
- | | G01 | Linear Interpolation | | + | | G01 | Linear Interpolation |
- | | G02 | Arc CCW Interpolation | | + | | G02 | Arc CCW Interpolation |
- | | G03 | Arc CW Interpolation | | + | | G03 | Arc CW Interpolation |
- | | G04 | Dwell | | + | | G04 | Dwell | | In milliseconds. Will prevent the axes from moving during the specified time period |
- | | G5.1 | < | + | | G5.1 | < |
- | | G5.2 | < | + | | G5.2 | < |
- | | G5.3 | < | + | | G5.3 | < |
| G10 | [[mycnc: | | G10 | [[mycnc: | ||
| G11 | Mirror Cancel | | | G11 | Mirror Cancel | | ||
Line 44: | Line 44: | ||
| G38.5 | G38.5 Probing | | | G38.5 | G38.5 Probing | | ||
| G38.9 | Tool Measure | | | G38.9 | Tool Measure | | ||
- | | G40 | Tool Correction Cancel | | + | | G40 | Tool Correction Cancel |
- | | G41 | Tool Correction Left | | + | | G41 | Tool Correction Left | | {{: |
- | | G42 | Tool Correction Right | | + | | G42 | Tool Correction Right | | {{: |
| G43 | G43 Tool Length Offset | | | G43 | G43 Tool Length Offset | | ||
| G44 | G44 Tool Length Offset | | | G44 | G44 Tool Length Offset | | ||
Line 94: | Line 94: | ||
| G97 | Set Spindle Speed | L | (revolutions per minute) | | | G97 | Set Spindle Speed | L | (revolutions per minute) | | ||
| G98 | Turn Feedrate per Minute | L | | | G98 | Turn Feedrate per Minute | L | | ||
- | | G98 | Canned Return Back to initial height | M | | | + | | G98 | Canned Return Back to initial height | M | {{: |
+ | On mill machines, G98 allows to return the tool back to initial height Z during the canned return process. | ||
| G99 | Turn Feedrate per Revolution | L | | | G99 | Turn Feedrate per Revolution | L | | ||
- | | G99 | Canned Return to a set height | M | | | + | | G99 | Canned Return to a set height | M | {{: |
| G150 | Tool Correction Radius Set | | | G150 | Tool Correction Radius Set | | ||
^ Miscellaneous M-codes ^^^^ | ^ Miscellaneous M-codes ^^^^ |
mycnc/gcodes_list.txt · Last modified: 2023/09/29 14:15 by ivan