Differences

This shows you the differences between two versions of the page.

--- mycnc:height_mapping [2019/10/21 15:56] – ivan
+++ mycnc:height_mapping [2019/11/19 11:12] – ivan
@@ Line 5: / Line 5: @@
 Height mapping allows to correct the G-code program for abnormalities and slight surface variations of the working material by mapping out the height map of the working material prior to beginning the cutting job. This function is extremely useful when dealing with a working surface which might be oriented imperfectly or may have some abnormalities to it, as well as programs which require a high degree of precision.
-The function is currently being tested for the X1366M, X1366M4 and X1366M6 profiles. In order to perform the height mapping procedure, do the following:
+The function is currently being tested for the X1366M, X1366M4 and X1366M6 profiles. Below is an example of the height mapping process in its current beta testing form:
+{{youtube>ydquih4IHko?large}}
+In order to perform the height mapping procedure, do the following:
   * Open the file that you will want to correct for the material variations
@@ Line 33: / Line 37: @@
 {{:mycnc:height-map-2-014-settings.png}}
-====Settings up the probing procedure====
+====Settings up the probing procedure (beta users)====
 The 3D height map .xml file for the X1366M-series profiles is currently available on request (beta testing as of October 2019). In order to set up the profile once you have received the file, do the following: