User Tools

Site Tools


mycnc:host_modbus_api

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
mycnc:host_modbus_api [2019/08/01 14:54] ivanmycnc:host_modbus_api [2019/08/01 15:26] (current) ivan
Line 51: Line 51:
 **Another read/write example for WP9038ADAM with digital inputs/outputs and analog inputs** **Another read/write example for WP9038ADAM with digital inputs/outputs and analog inputs**
  
-The analog inputs in this example are the holding registers, while the bits are the digital inputs and outputs which are dealt with through read/write commands. +The analog inputs in this example are the holding registers, while the bits are the digital inputs and outputs which are dealt with through read/write commands. The code is using a 3 ms delay in order to loop the timer and to allow the Modbus device to receive/send all the necessary commands. 
 <code c>main() <code c>main()
 { {
Line 111: Line 112:
 };</code> };</code>
  
 +The specifications for the Modbus devices that are currently sold through the myCNC shop can be found here: 
 +[[mycnc:modbus_devices|Modbus Devices available]]
mycnc/host_modbus_api.txt · Last modified: 2019/08/01 15:26 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki