User Tools

Site Tools


mycnc:item_list

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mycnc:item_list [2019/09/09 11:43]
ivan
mycnc:item_list [2019/12/30 11:43] (current)
ivan
Line 6: Line 6:
  
 ^ Item ^ Description ^ ^ Item ^ Description ^
-| motion-overspeed | Controls the feed rate overspeed from the main screen of myCNC software (can also set motion-overspeed-inc or motion-overspeed-dec to incrementally increase/​decrease the value). The overspeed is measured in percent of the default motion speed (100 percent is the default). It is possible to set the maximum/​minimum bounds for this item in Settings > Config > Motion. |+| motion-overspeed | Controls the feed rate overspeed from the main screen of myCNC software (can also set motion-overspeed-inc or motion-overspeed-dec to incrementally increase/​decrease the value). The overspeed is measured in percent of the default motion speed (100 percent is the default). It is possible to set the maximum/​minimum bounds for this item in Settings > Config > Motion ​(the safe range is between 5 and 150 percent for the ET6, ET7 and ET10 controllers). |
 | jog-overspeed | Controls the jog overspeed (can also set jog-overspeed-inc and jog-overspeed-dec to incrementally increase/​decrease the value). | | jog-overspeed | Controls the jog overspeed (can also set jog-overspeed-inc and jog-overspeed-dec to incrementally increase/​decrease the value). |
 | spindle-speed | Controls the spindle rotation speed, in rpm | | spindle-speed | Controls the spindle rotation speed, in rpm |
mycnc/item_list.1568043818.txt.gz · Last modified: 2019/09/09 11:43 by ivan