User Tools

Site Tools


mycnc:limits

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mycnc:limits [2018/08/16 04:50]
pupalaiser
mycnc:limits [2018/08/16 04:50] (current)
pupalaiser
Line 28: Line 28:
   * To activate the function "Jog slow down" , it is necessary to check the box next to its name:{{ :​mycnc:​2018-08-14_15-25-13.jpg?​nolink |}}   * To activate the function "Jog slow down" , it is necessary to check the box next to its name:{{ :​mycnc:​2018-08-14_15-25-13.jpg?​nolink |}}
   * The example below shows the setting of the function for several axes (X, Y, Z, A, B){{ :​mycnc:​2018-08-14_15-25-33.jpg?​nolink |}}   * The example below shows the setting of the function for several axes (X, Y, Z, A, B){{ :​mycnc:​2018-08-14_15-25-33.jpg?​nolink |}}
-  * Taking into account the settings of software limits and settings of the function, the machine will move with a speed reduced to 20% in the coordinates from 0 to 50 (0 + 50) and from 2960 to 3010 (2960 + 50 = 3010). Similarly, when moving along the coordinate Y in coordinates from 0 to 50 (0 + 50) and from 1460 to 1510 (1460 + 50 = 1510) it will move with a speed reduced to 20%. +  * Taking into account the settings of software limits and settings of the function, the machine will move with a speed reduced to 20% in the coordinates from 0 to 50 (0 + 50) and from 2960 to 3010 (2960 + 50 = 3010). Similarly, when moving along the coordinate Y in coordinates from 0 to 50 (0 + 50) and from 1460 to 1510 (1460 + 50 = 1510) it will move with a speed reduced to 20%.In the same way, when moving along the coordinate Z, in the coordinates from -300 to -280 (-300 + 20 = -280) and from -20 to 0 (0-20 = -20) it will move with a speed reduced to 20%.{{ :​mycnc:​2018-08-14_15-24-58.jpg?​nolink |}}
-In the same way, when moving along the coordinate Z, in the coordinates from -300 to -280 (-300 + 20 = -280) and from -20 to 0 (0-20 = -20) it will move with a speed reduced to 20%.{{ :​mycnc:​2018-08-14_15-24-58.jpg?​nolink |}}+
  
  
  
mycnc/limits.txt · Last modified: 2018/08/16 04:50 by pupalaiser