Differences

This shows you the differences between two versions of the page.

--- mycnc:m6_tool_change_macro:m6_tool_change_macro [2018/04/04 12:42] – skirillov
+++ mycnc:m6_tool_change_macro:m6_tool_change_macro [2018/04/05 10:36] – skirillov
@@ Line 57: / Line 57: @@
 #300=#300*60 (multiply 60 degrees)
-G91 G0 C#300 F#120
+M7 (unlock the drum locker)
+G91 G0 C5   F#120 (rotate 5 degrees to release the drum lock)
+G91 G0 C#300 F#120 (move rotate to the next tool)
 G91 G0 C-5   F#120 (lock the drum by reverse revolving to 5 degrees)
+M9 (lock the drum locker)