Differences

This shows you the differences between two versions of the page.

--- mycnc:m6_tool_change_macro:m6_tool_change_macro [2019/11/15 10:19] – ivan
+++ mycnc:m6_tool_change_macro:m6_tool_change_macro [2020/05/18 11:06] – ivan
@@ Line 1: / Line 1: @@
 ===== M6 Tool Change Macro =====
+**NOTE:** For the M6TXX codes to work, they must be enabled in the myCNC Settings (Settings > Config > G-codes settings):
+{{::config-080-tool-change.png}}
 T-code of G-codes has higher priority than M6. For a command <code>M6T2</code> T2 will be executed first, then M6.