Differences

This shows you the differences between two versions of the page.

--- mycnc:modbus_setup [2019/07/29 15:52] – ivan
+++ mycnc:modbus_setup [2019/07/29 15:53] – ivan
@@ Line 7: / Line 7: @@
 The transparent mapping of Modbus inputs/outputs can be done through the **I/O Expand cards mapping** window in Settings > Config > Inputs/Outputs/Sensors. In this part, the focus will be on expanding the number of inputs/outputs in a standard myCNC controller using a WELLPRO Modbus device. This process provides the user with a way to easily add 8 more inputs and 8 more outputs per Modbus device connected, allowing to connect more peripherals to the myCNC controller.
-<code>NOTE: In order for the Modbus device to connect properly, the "RS485/Modbus communication"
+<code>NOTE: In order for the Modbus device to connect properly, the
-checkbox should be UNCHECKED in the Config > Technology > Mill/Lathe > Spindle configuration dialog</code>
+"RS485/Modbus communication" checkbox should be
+UNCHECKED in the Config > Technology > Mill/Lathe > Spindle
+configuration dialog</code>
 {{:mycnc:modbus-io-004.png}}