Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc [2019/06/06 12:44] – ivan
+++ mycnc:mycnc [2019/06/06 13:14] – ivan
@@ Line 27: / Line 27: @@
      - Add **Computer Vision** codes for Camera Layer
    - **Tangential Knife support**. If Tangential Control activated, myCNC control software automatically add Knife Lift Up/Down and knife rotation to follow path direction, so standard 2D (or 2.5D) g-code programming is enough to run Tangential Knife with myCNC. {{:mycnc:main-features-knife-001.png}}
-   - **ATC (Automatic Tool Change)** is supported for any myCNC control board. myCNC contains Macro Wizard to generate Tool change macros for different kind of Tool changers (linear, drum/rotary, chain)
-   - **Multi-Tool support**. If several tools is installed on machine head myCNC control software can handle switching tools procedure and apply tool offsets just like standard M6/Tool change procedure
+**ATC (Automatic Tool Change)** is supported for any myCNC control board. myCNC contains Macro Wizard to generate Tool change macros for different kind of Tool changers (linear, drum/rotary, chain)
+ **Multi-Tool support**. If several tools is installed on machine head myCNC control software can handle switching tools procedure and apply tool offsets just like standard M6/Tool change procedure
 {{:mycnc:main-features-multihead-001.png}}
 {{:mycnc:main-features-knife-003.png}}
-   - **Laser Strength Control**. myCNC software allows the user to adjust the laser strength depending on the speed with which the laser beam is moving across the surface of the material. This is highly useful to eliminate overheating from the laser beam that would otherwise occur at corners and parts of the program where the beam slows down. {{:mycnc:main-features-laser-001.png}}
-   - **Wireless Pendant control support**. myCNC supports a number of Wireless Pendant Controls {{  mycnc:xhc-4.jpg?700  }}
+**Laser Strength Control**. myCNC software allows the user to adjust the laser strength depending on the speed with which the laser beam is moving across the surface of the material. This is highly useful to eliminate overheating from the laser beam that would otherwise occur at corners and parts of the program where the beam slows down. {{:mycnc:main-features-laser-001.png}}
-   - **Advanced 2D/3D visualization**, real-time IO monitoring,
-   - **Row and Column Nesting**. myCNC able to multiply g-code file by given number along X and Y axes.
+**Wireless Pendant control support**. myCNC supports a number of Wireless Pendant Controls {{  mycnc:xhc-4.jpg?700  }}
+**Advanced 2D/3D visualization**, real-time IO monitoring,
+**Row and Column Nesting**. myCNC able to multiply g-code file by given number along X and Y axes.
 {{:mycnc:main-features-row-nesting-001.png}}
 {{:mycnc:main-features-row-nesting-002.png}}
 {{:mycnc:main-features-row-nesting-003.png}}
-   - **Tool Radius Compensation** with visualization. myCNC does Tool Radius compensation according G40-G42 codes and Tool Table and able to show results on Visualization widget to visual control.\\ {{mycnc-tool-radius-visualization-001.png?390  }} {{mycnc-tool-radius-visualization-002.png?390  }}\\ {{mycnc-tool-radius-visualization-003.png?700  }}
+**Tool Radius Compensation** with visualization. myCNC does Tool Radius compensation according G40-G42 codes and Tool Table and able to show results on Visualization widget to visual control.
+{{:mycnc:main-features-compensation-001.png}}
+{{:mycnc:main-features-compensation-002.png}}