Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_configuration_dialogs [2019/07/12 15:18] – ivan
+++ mycnc:mycnc_configuration_dialogs [2019/07/12 15:49] – ivan
@@ Line 127: / Line 127: @@
 === MPG through binary inputs ===
 {{:mycnc:config-mpg-binary-001.png}}
-These settings allow the user to set up MPG through binary inputs behaviour.
+These settings allow the user to set up the manual pulse generator behaviour. The following settings can be modified:
+  * Enabled/disabled toggle for each MPG
+  * Input ports number (2 ports needed for an MPG).
+  * Slot can be changed between MPG (to move the spindle around), THC/Z axis offset for manual control of the z-axis during torch height control, or Spindle Sync to synchronize the vertical z-axis movement and the rotation of the spindle.
+  * Encoder resolution: number of encoder markings per rotation * number of impulses per marking
 === Jog through ADC inputs ===