User Tools

Site Tools


mycnc:mycnc_et6

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mycnc:mycnc_et6 [2019/06/11 11:33]
ivan
mycnc:mycnc_et6 [2019/06/14 13:01] (current)
ivan
Line 101: Line 101:
 === 3-wire NPN sensor connection example (external power supply)=== === 3-wire NPN sensor connection example (external power supply)===
  
-{{:​mycnc:​et6-npn-external-power-001.png}}+{{:​mycnc:​et6-npn-external-power-001-v2.png}}
  
 === 3-wire PNP sensor connection example (external power supply)=== === 3-wire PNP sensor connection example (external power supply)===
-{{:​mycnc:​et6-pnp-external-power-001.png}}+{{:​mycnc:​et6-pnp-external-power-001-v2.png}}
  
 === 3-wire NPN sensor connection example (internal power supply)=== === 3-wire NPN sensor connection example (internal power supply)===
-{{:​mycnc:​et6-npn-internal-power-001.png}}+{{:​mycnc:​et6-npn-internal-power-001-v2.png}}
  
 === 3-wire PNP sensor connection example (internal power supply)=== === 3-wire PNP sensor connection example (internal power supply)===
-{{:​mycnc:​et6-pnp-internal-power-001.png}}+{{:​mycnc:​et6-pnp-internal-power-001-v2.png}}
  
 <​code>​Depending on the particular sensor, power can be supplied through any of the power input connections (5V, 12V, 24V). 24V was chosen in these examples as it is the industry standard.</​code>​ <​code>​Depending on the particular sensor, power can be supplied through any of the power input connections (5V, 12V, 24V). 24V was chosen in these examples as it is the industry standard.</​code>​
Line 119: Line 119:
  
 ===Switch connection example (external power supply)=== ===Switch connection example (external power supply)===
-{{:​mycnc:​et6-switch-external-001.png}}+{{:​mycnc:​et6-switch-external-001-v2.png}}
  
-{{:​mycnc:​et6-switch-external-002.png}}+{{:​mycnc:​et6-switch-external-002-v2.png}}
  
 ==== ET6 control board firmware reflash ==== ==== ET6 control board firmware reflash ====
mycnc/mycnc_et6.txt ยท Last modified: 2019/06/14 13:01 by ivan