User Tools

Site Tools


mycnc:mycnc_rotate_widget

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
mycnc:mycnc_rotate_widget [2018/07/20 12:38] pupalaisermycnc:mycnc_rotate_widget [2019/10/31 12:04] ivan
Line 1: Line 1:
-**MyCNC Rotete Widget. Main window.** +======MyCNC Rotation Widget====== 
-{{ :mycnc:2018-05-25_14-39-01.jpg?nolink&1000 |}} + 
-//**Basic functions.**// +Below is the main screen of the rotation widget: 
-{{ :mycnc:rotate_1.png?nolink&1000 |}} +{{:mycnc:rotation-widget-001-main-screen.png}} 
-| {{:mycnc:button-refresh.svg.png?nolink&60|}}   |refresh of the visual display of the nesting chart     |{{:mycnc:rotate.png?60|}}|Applying the transformation| + 
-|{{:mycnc:x_.png?60|}}|Moving along the X axis to the set value|{{:mycnc:lib-run.svg.png?60|}}|Loading the converted cutting map into the main program window| +//**Basic rotation widget functions:**// 
-|{{:mycnc:y_.png?60|}}|Moving along the Y axis to the set value|{{:mycnc:3dots.png?60|}}|Entering the value of the angle of rotation|+{{:mycnc:rotation-widget-002-tooltips.png}} 
 +|{{:mycnc:rotation-widget-006-button-refresh.png}}|Refresh the nesting chart (visual display)     |{{:mycnc:rotation-widget-003-button-apply.png}}|Apply the rotation / file transformation| 
 +|{{:mycnc:rotation-widget-007-button-x.png}}|Move along the X axis to the specified value|{{:mycnc:rotation-widget-005-button-load.png}}|Load the converted cutting map into the main program window| 
 +|{{:mycnc:rotation-widget-008-button-y.png}}|Move along the Y axis to the specified value|{{:mycnc:rotation-widget-004-button-enter-angle.png}}|Enter the rotation angle value|
 //**Transformation of the control program relative to the vertical axis.**// //**Transformation of the control program relative to the vertical axis.**//
-{{ :mycnc:2018-05-30_17-33-06.jpg?nolink&1000 |}} +{{:mycnc:rotation-widget-009-vertical.png}} 
-| {{ :mycnc:mirror-x.svg.png?nolink&60 |}}  |Turning off the transformation about the vertical axis.|{{ :mycnc:mirror-x-checked.svg.png?nolink&60 |}}|Turning on the transformation about the vertical axis | +| {{ :mycnc:mirror-x.svg.png?nolink&60 |}}  |Signifies that transformation about the vertical axis is OFF.|{{ :mycnc:mirror-x-checked.svg.png?nolink&60 |}}|Transformation about the vertical axis is ON
-//**Transformation of the control program relative to the  horizontal axis.**//+//**Transformation of the control program relative to the horizontal axis.**//
  
-{{ :mycnc:2018-05-30_17-33-48.jpg?nolink&1000 |}} +{{:mycnc:rotation-widget-010-horizontal.png}} 
-| {{ :mycnc:mirror-y.svg.png?nolink&60 |}}  |Turning off the transformation about the horizontal axis.|{{ :mycnc:mirror-y-checked.svg.png?nolink&60 |}}|Turning on the transformation about the horizontal axis | +| {{ :mycnc:mirror-y.svg.png?nolink&60 |}}  |Transformation about the horizontal axis is OFF.|{{ :mycnc:mirror-y-checked.svg.png?nolink&60 |}}|Transformation about the horizontal axis is ON
-**//Transformation of the control program relative to the vertical and horizontal axis simultaneously.//**+**//Transformation of the control program relative to the vertical and horizontal axes simultaneously.//**
  
-{{ :mycnc:2018-05-30_17-34-10.jpg?nolink&1000 |}} +{{:mycnc:rotation-widget-011-xy.png}} 
-|{{ :mycnc:mirror-xy.svg.png?nolink&60 |}}  |Turning off the transformation about the horizontal and vertical axis simultaneously.|{{ :mycnc:mirror-xy-checked.svg.png?nolink&60 |}}|Turning on the transformation about the horizontal and vertical axis simultaneously.| +|{{ :mycnc:mirror-xy.svg.png?nolink&60 |}}  |Transformation about both the horizontal and the vertical axis is OFF|{{ :mycnc:mirror-xy-checked.svg.png?nolink&60 |}}|Transformation about both the horizontal and the vertical axis is ON.| 
-**//Rotate the nesting map to the specified angle//**+**//Rotation of the nesting map to some specified angle//**
  
-{{:mycnc:rotate_6.png?1000|}} +{{:mycnc:rotation-widget-012-enter-angle-popup.png}} 
-//To cut the corrected nesting chart, it is necessary to press the send button of the corrected nesting map to the main program window.// +//To be able to use the corrected nesting chart, it is necessary to press the Send button in order to display the rotated file in the main program window. // 
-{{:mycnc:rotate_7.png?1000|}}+{{:mycnc:rotation-widget-013-send.png}}
  
-**//Correction of the position of the sheet by two points//**+**//Sheet position correction by using two points//**
  
-//Setting the first point.мInstall the plasma torch on the lower left corner of the sheet. And fix the first pointby pressing the button "1"Moves are carried out with the help of arrows in the center of the screen.// +//Set the first point. Position the plasma torch at the lower left corner of the sheet. The point is recorded by pressing the "1" buttonMovement is done with the arrows at the center of the screen.// 
-{{:mycnc:rotate_2.png?1000|}} +{{:mycnc:rotation-widget-014.png}} 
-//Next, move the plasma torch along the sheet (the longer the movement, the more accurate the correction will be). We bring the plasmatron to the edge of the sheet after moving along it. We fix the second point by pressing the button "2"Moves are carried out with the help of arrows in the center of the screen.// +//Next, move the plasma torch along the sheet (the longer the distance of this movement, the more accurate the correction will be). We bring the plasma torch to the edge of the sheet after moving along it. We assign this second point by pressing the "2" buttonMovement is done with the arrows at the center of the screen.// 
-{{:mycnc:rotate_3.png?1000|}} +{{:mycnc:rotation-widget-015.png}} 
-//After clicking on the "confirmation confirmation" button, you must confirm the conversion in the appeared window.// +//After clicking on the "Apply Correction" button, you must confirm the program conversion in the popup window (press the check mark icon).// 
-{{:mycnc:rotate_4.png?1000|}} +{{:mycnc:rotation-widget-016.png}} 
-//After confirmation, the correction will be displayed on the screen. To cut the corrected nesting chart, it is necessary to press the send button of the corrected nesting map to the main program window.// +//After the confirmation button has been pressed, the correction will be displayed on the screen. To use this corrected program file, it is now necessary to press the Send button to display the altered nesting map in the main program window.// 
-{{:mycnc:rotate_5.png?1000|}}+{{:mycnc:rotation-widget-017.png}}
  
-**//Turning the nesting map to the previously used angle//**+**//Rotation of the nesting map to previously used angle//**
  
-//Select the value of the rotation angle from the previously used// +//Select the rotation angle from the list of previously used values// 
-{{:mycnc:rotate_8.png?1000|}}+{{:mycnc:rotation-widget-018.png}}
  
-//Confirm or cancel the correction// +//Confirm or cancel the rotation// 
-{{:mycnc:rotate_9.png?1000|}} +{{:mycnc:rotation-widget-019.png}} 
-//To cut the corrected nesting chart, it is necessary to press the send button of the corrected nesting map to the main program window.// +//After the changes have been applied, it is necessary to press the Send button to display the rotated nesting map in the main program window so that .// 
-{{:mycnc:rotate_10.png?1000|}}+{{:mycnc:rotation-widget-020.png}}
  
  
  
  
mycnc/mycnc_rotate_widget.txt · Last modified: 2022/02/08 16:36 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki