Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_screen_configuration [2020/03/10 09:10] – ivan
+++ mycnc:mycnc_screen_configuration [2020/05/08 13:41] – ivan
@@ Line 2: / Line 2: @@
 In this manual, we will be going through all the different elements that can be used to display (and interact with) the necessary information on the myCNC screen. Sample examples for the step-by-step screen configuration of myCNC software are available [[mycnc:mycnc_screen_configuration:screen_configuration_examples|here]].
+Video tutorial:
+{{youtube>Nnz82oJOLA4?large}}
 ==== Getting Started with editing the myCNC screen====
@@ Line 531: / Line 535: @@
       * "outputs" - the light is "attached" to an output pin
       * "number" - defines the pin number than the light is attached to. A number can be assigned directly, for example \\ number="0" for pin #0 \\ number="15" for ipn #15 \\ or through pin definition file used in Hardware PLC - "pins.h". In this case sign "#" and the pin name defined in "pins.h" should be instead of pin number. For example \\ **number="#OUTPUT_SPINDLE"** \\ and "pins.h should contain this name definition, for example <code C>#define OUTPUT_SPINDLE 7</code>
+Another example of an xbutton realized with a **ref** value for reference to switch (toggle) a variable between two states:
+<code><gitem where="x-reserv" position="85;5" width="80" height="80"
+ image="rect/normal"
+ image-hovered="rect/hovered"
+ action="cnc-gvariable-switch-5701"
+ xattr="0;0;80;80;led;red;round" name="display-cnc-gvariable-5701" data="---;1;16" ref="16" tooltip="Sheet/tube cutting" images="mode-sheet;mode-tube"
+ type="xbutton"/></code>
+  * **data** specifies which values the switch is occuring (the cnc-gvariable-switch-5701 action in this case)
+  * **ref** specifies the reference value to monitor for
 ++++