Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_setup_examples [2019/05/21 13:43] – ivan
+++ mycnc:mycnc_setup_examples [2019/05/24 10:35] – ivan
@@ Line 48: / Line 48: @@
 ===How to set up a Probing Wizard in Mill profile===
-In order to set up a mill profile from scratch on your machine (especially if the software has not, for any reason, been updated to its latest version) please check the following:
+In order to properly set up a probe system on a mill profile from scratch on your machine (especially if the software has not, for any reason, been updated to its latest version) please consult the [[quickstart:mycnc-quick-start:probe_setup|QuickStart manual for the probe sensor setup]]:
-. In **CNC Settings > PLC > Hardware PLC**, check that the command **TRIG04** is created. The program should contain the following code:
-<code>
-main()
-{
-  gvarset(9122,1);  timer=30;do{timer--;}while(timer>0); //show message
-  if (gvarget(6060)!=0x57)
-  {
-    message=PLCCMD_MOTION_BREAK;
-    timer=30;do{timer--;}while(timer>0);
-  };
-  exit(99);
-};
-</code>
-{{:mycnc:mill-probe-software-001.jpg}}
-. In **CNC Settings > Probing Wizard > Probing Macro Wizard**, click **Generate All Probing Macros** and **Generate PLC Probing procedure M288**. Among other settings, this generates the necessary windows for the popup screens of the probe sensor (popups 20, 21 and 22).
-{{:mycnc:mill-probe-software-002.jpg}}
-. If you want to set the particular port that you are using for your sensor, go to Go to **CNC Settings > Probing Wizard > Probing Config** and click the **Enable Probe sensor protection** button after setting the particular port desired (Port 9 for this example). This setting will be automatically mirrored in the **CNC Settings > Triggers/Timers** window.
-{{:mycnc:mill-probe-software-003.jpg}}
-. Double-check the TRIG04 procedure from Step 1, and edit it back to the code above if it had been changed (this can occur on older versions of the software).
-The probe wizard setup should now be complete.
 === How to set up a Lathe/Turning machine ===