User Tools

Site Tools


mycnc:rotary_encoder_connection_and_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
mycnc:rotary_encoder_connection_and_setup [2018/08/10 21:38] skirillovmycnc:rotary_encoder_connection_and_setup [2018/09/07 21:59] skirillov
Line 1: Line 1:
 ===== Rotary encoder connection and setup ===== ===== Rotary encoder connection and setup =====
  
-There are 2 types or rotary encoders widely used in Pendants and operator panels - +There are 2 types of rotary encoders widely used in Pendants and operator panels - 
   * Simple rotary encoder based on 2 switches. This type of encoders usually generate 10-40 pulses per revolution (PPR) and used as fancy style "endless multi-turn potentiometer".   * Simple rotary encoder based on 2 switches. This type of encoders usually generate 10-40 pulses per revolution (PPR) and used as fancy style "endless multi-turn potentiometer".
  
Line 65: Line 65:
 There is configuration dialog to set up connection between slow encoder values and CNC parameters. There is configuration dialog to set up connection between slow encoder values and CNC parameters.
  
-  * Source - source of connection - can be Encoder, ADC, input/output pin, PWM, global variable or other parameters +  * Source - source of connection - can be Encoder, ADC, input/output pin, PWM, global variable or other parameters 
-  * Source/Parameter - address of source. It can be Encoder number, input pin number, global variable address etc+  * Source/Parameter - address of the source. It can be Encoder number, input pin number, global variable address etc
   * Destination - destination connection   * Destination - destination connection
   * Destination/Parameter - destination address   * Destination/Parameter - destination address
-  * K - destination ratio. For example, Spindle speed will be increased 100RPM every encoder click if "K=100".+  * K - destination ratio. For example, Spindle speed will be increased 100RPM every encoder clicks if "K=100".
  
  
Line 129: Line 129:
   - Goto Diagnose widget and check binary input pins the encoder attached to are blinking while you turn the encoder. There are input pins #18, #19 on a picture {{hardware:et7:mycnc-profiles--44.png}}   - Goto Diagnose widget and check binary input pins the encoder attached to are blinking while you turn the encoder. There are input pins #18, #19 on a picture {{hardware:et7:mycnc-profiles--44.png}}
   - Check "Slow Encoder" value are changed while you turn the encoder.   - Check "Slow Encoder" value are changed while you turn the encoder.
-  - Check Destination item value is changed while you turn the encoder.{{hardware:et7:mycnc-encoders-test.png}}+  - Check Destination item value is changed while you turn the encoder. 
 + 
 +{{hardware:et7:mycnc-encoders-test.png}}
  
  
mycnc/rotary_encoder_connection_and_setup.txt · Last modified: 2022/03/22 13:49 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki