Differences

This shows you the differences between two versions of the page.

--- mycnc:rotary_encoder_connection_and_setup [2018/08/10 21:38] – skirillov
+++ mycnc:rotary_encoder_connection_and_setup [2018/09/07 21:59] – skirillov
@@ Line 1: / Line 1: @@
 ===== Rotary encoder connection and setup =====
-There are 2 types or rotary encoders widely used in Pendants and operator panels -
+There are 2 types of rotary encoders widely used in Pendants and operator panels -
   * Simple rotary encoder based on 2 switches. This type of encoders usually generate 10-40 pulses per revolution (PPR) and used as fancy style "endless multi-turn potentiometer".
@@ Line 65: / Line 65: @@
 There is configuration dialog to set up connection between slow encoder values and CNC parameters.
-  * Source - source of connection - can be Encoder, ADC, input/output pin, PWM, global variable or other parameters
+  * Source - a source of connection - can be Encoder, ADC, input/output pin, PWM, a global variable or other parameters
-  * Source/Parameter - address of source. It can be Encoder number, input pin number, global variable address etc
+  * Source/Parameter - address of the source. It can be Encoder number, input pin number, global variable address etc
   * Destination - destination connection
   * Destination/Parameter - destination address
-  * K - destination ratio. For example, Spindle speed will be increased 100RPM every encoder click if "K=100".
+  * K - destination ratio. For example, Spindle speed will be increased 100RPM every encoder clicks if "K=100".