User Tools

Site Tools


mycnc:touchscreen_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mycnc:touchscreen_setup [2019/12/13 09:47]
ivan
mycnc:touchscreen_setup [2019/12/13 09:56] (current)
ivan
Line 1: Line 1:
 ======Touchscreen setup and calibration====== ======Touchscreen setup and calibration======
  
-This manual describes the touchscreen setup process for the touchscreens provided by Puruvesi Automation. Setup of screens provided by third parties may differ. ​+This manual describes the touchscreen setup process for the 10"/​15" ​touchscreens provided by Puruvesi Automation. Setup of screens provided by third parties may differ. ​
  
 ====10"​ screen==== ====10"​ screen====
Line 8: Line 8:
  
   * Screen   * Screen
-  * Touchscreen panel (separate from the screenshould be overlaid on top of the screen)+  * Touchscreen panel (separate from the screenshould be overlaid on top of the screen ​during use)
   * Touchscreen driver   * Touchscreen driver
   * LVDS driver   * LVDS driver
Line 44: Line 44:
   * Connection cables   * Connection cables
  
-//NOTE: The HDMI/power cords are not included in the kit.// ​+//NOTE: The HDMI / 12V power supply ​cords are not included in the kit.// ​
  
 Below is the connection diagram for the 15" screen: Below is the connection diagram for the 15" screen:
Line 62: Line 62:
 ====Touchscreen Calibration==== ====Touchscreen Calibration====
  
-//NOTE: This calibration manual is designed for Ubuntu/Ubuntu Mate users.//+//NOTE: This calibration manual is designed for Ubuntu ​and Ubuntu Mate users.//
  
 //NOTE #2: The touchscreen driver must be connected to the PC via USB prior to beginning the calibration setup process.// ​ //NOTE #2: The touchscreen driver must be connected to the PC via USB prior to beginning the calibration setup process.// ​
mycnc/touchscreen_setup.txt · Last modified: 2019/12/13 09:56 by ivan