Differences

This shows you the differences between two versions of the page.

--- mycnc:wireless_pendants [2019/07/26 12:13] – ivan
+++ mycnc:wireless_pendants [2019/07/26 12:35] – ivan
@@ Line 62: / Line 62: @@
 | Parking position: Save | Save the current position as the parking position |
 | Parking position: Move to | Move to the parking position |
-| Pendant: Axis (*) |  |
+| Pendant: Axis (*) | Switches through all the available axis values on repeat (continuously looping through the values as the button is pressed) |
-| Pendant: Mul (*) |  |
+| Pendant: Mul (*) | Switches through all available step size values on repeat (continuously looping through the available step size values) |
 | Pendant: Wheel CW | Record the input as wheel moving clockwise |
 | Pendant: Wheel CCW | Record the input as wheel moving counter-clockwise |
@@ Line 87: / Line 87: @@
 | Spindle Speed: dec | Decrease the current spindle speed |
 | Spindle Speed: set | Set the current spindle speed |
-| Tie Toolpath Position to current work position |  |
+| Tie Toolpath Position to current work position | Used on control programs with a large number of parts, this allows to tie the toolpath position to the current work position. Effectively, this allows to cut out a small part of the control program anywhere on the sheet, by simply specifying the position of the toolpath |
-| Toggle Machine/Work DRO (if applicable) |  |
+| Toggle Machine/Work DRO (if applicable) | A setting for pendants which only show one coordinate system at a time (machine or program coordinate). This allows to switch between the two coordinate systems - used only on select controllers. |
 | Toggle Jog enable/disable | Turn jog on and off |
 | Toggle Jog mode unlimited/step | Switch between the unlimited and a set step jog for machine movements |