User Tools

Site Tools


plc:button_to_toggle_select_output_pin_with_indication

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
plc:button_to_toggle_select_output_pin_with_indication [2017/12/06 13:49]
es
plc:button_to_toggle_select_output_pin_with_indication [2017/12/06 13:49] (current)
es
Line 40: Line 40:
 To add Software PLC procedure -  To add Software PLC procedure - 
   * Go to Software PLC tab   * Go to Software PLC tab
-  * Press **+** (Add) button and enter PLC procedure name {{mycnc::​mycnc-add-toggle-output--2.png}}+  * Press **+** (Add) button and enter PLC procedure name {{mycnc::​mycnc-add-toggle-output--3.png}}
   * Fill the procedure source code   * Fill the procedure source code
   * Press 2 buttons on the right - **Build All** and **Save** to save sourece code and build PLC binary file   * Press 2 buttons on the right - **Build All** and **Save** to save sourece code and build PLC binary file
plc/button_to_toggle_select_output_pin_with_indication.txt · Last modified: 2017/12/06 13:49 by es