Differences

This shows you the differences between two versions of the page.

--- plc:software_plc_examples [2021/02/03 16:04] – ivan
+++ plc:software_plc_examples [2022/03/29 15:55] (current) – ivan
@@ Line 1: / Line 1: @@
 ==== Software PLC examples ====
+//**NOTE**: The myCNC team recommends utilizing the examples provided in this manual (as well as other manuals in this documentation) as a starting point for your machine setup. When possible (and applicable), it is recommended to keep changes to a mininum. In general, using these examples as the basis for your PLCs/macro commands allows for an easier setup process.//
+===General examples===
   * [[How to add mandatory Homing after Emergency Button and-or Servo ready alarm]]
@@ Line 204: / Line 208: @@
-==== Jog Step (0.001, 0.01, 0.1 1.0) Indication with external LED display ====
+===Jog Step (0.001, 0.01, 0.1 1.0) Indication with external LED display===