myCNC Online Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Load NC-codes from USB drives under Linux =====

Goto **Settings manager**

{{ :quickstart:load-from-usb:mycnc-update-001-104.png }}

Find **Removable drives and Media** Icon and open it

{{ :quickstart:load-from-usb:mycnc-update-001-105.png }}

Check **Mount removable drives...** and **Mount removable media....**

press **close**


{{ :quickstart:load-from-usb:mycnc-update-001-106.png }}

After it USB flash drives will be automatically mounted into the system folder **/media/operator** when inserted.
<code>System automatically mounts flash drives into folder /media/user_name
user_name is your user name
for Tinkerboard images we provide the foolder is 
/media/operator

for LiveCD a default user name is "mycnc" and the folder is
/media/mycnc

If you change your user name, use this name accordingly

</code>


Goto **myCNC software**
**Config** **Preferences**  **NC code folders**

Add folder name where USB flash drives will be mounted - 

**/media/operator**

and press **Save**

{{ :quickstart:load-from-usb:bitmap-usb.png }}

Now you should be able to open files directly from USB drive if search in **/media/operator/USB_drive_label** folder

{{ :quickstart:load-from-usb:mycnc-update-001-108.png }}