User Tools

Site Tools


quickstart:mycnc-quick-start:cnc-vision-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
quickstart:mycnc-quick-start:cnc-vision-setup [2020/01/16 14:04] ivanquickstart:mycnc-quick-start:cnc-vision-setup [2020/01/16 14:07] ivan
Line 140: Line 140:
  
 //Obsolete method only used on program versions older than July 2019. In all recent versions the pixel to length coefficients is calculated automatically by the program during the calibration process.// //Obsolete method only used on program versions older than July 2019. In all recent versions the pixel to length coefficients is calculated automatically by the program during the calibration process.//
 +
 +++++ Click to expand |
    
 The pixel to length coefficient is necessary for the camera to know how many millimeters it had moved after having traversed a certain number of pixel to the left/right/top/bottom of its original position. This procedure is done by finding the ratio of millimeters moved to pixels travelled. While it is automated in the newer versions of myCNC software, it can also be done manually in the older software versions.  The pixel to length coefficient is necessary for the camera to know how many millimeters it had moved after having traversed a certain number of pixel to the left/right/top/bottom of its original position. This procedure is done by finding the ratio of millimeters moved to pixels travelled. While it is automated in the newer versions of myCNC software, it can also be done manually in the older software versions. 
Line 179: Line 181:
 After both axes have been calibrated, the machine will now have a proper coefficient of the number of pixels it moved by versus actual distance travelled in millimeters. After both axes have been calibrated, the machine will now have a proper coefficient of the number of pixels it moved by versus actual distance travelled in millimeters.
  
 +++++
  
 ====Using the hotkeys to move the camera==== ====Using the hotkeys to move the camera====
quickstart/mycnc-quick-start/cnc-vision-setup.txt · Last modified: 2024/02/26 14:50 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki