Differences

This shows you the differences between two versions of the page.

--- thc:thc [2019/12/30 13:33] – ivan
+++ thc:thc [2020/02/19 13:04] – ivan
@@ Line 68: / Line 68: @@
 {{:thc:thc-setup-007-acceleration.png}}
-**8.** Set the **THC Low Speed** value. Whenever the speed of the machine will fall lower than this value, the possibility of the arc voltage fluctuating rises greatly. Thus, to prevent the torch from diving, the last height value before the speed goes below your THC Low Speed value is taken and maintained until the speed rises back up again.
+**8.** Set the **THC Low Speed, [%] of feedrate** value. Whenever the speed of the machine will fall lower than this percentage of the feedrate, the possibility of the arc voltage fluctuating rises greatly. Thus, to prevent the torch from diving, the last height value before the speed goes below your THC Low Speed percentage value is taken and maintained until the speed rises back up again.
 **9.** Select the Hi/Lo event output port (63 by default).