User Tools

Site Tools


troubleshooting:camera_troubleshooting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
troubleshooting:camera_troubleshooting [2020/01/16 14:09] ivantroubleshooting:camera_troubleshooting [2020/07/13 12:50] ivan
Line 1: Line 1:
 ======Camera Troubleshooting====== ======Camera Troubleshooting======
  
-The full manual on regular camera setup is available here: [[quickstart:mycnc-quick-start:cnc-vision-setup|CNC Vision Setup]]. +The full manual on regular camera setup for Optical Registration Mark Reading is available here: [[quickstart:mycnc-quick-start:cnc-vision-setup|CNC Vision Setup]]. 
  
 The steps described in this manual are typically not required to set up a camera purchased from Puruvesi Automation, since the camera comes pre-configured out of the box, and should be used only in situations when access to deep camera settings is required. The steps described in this manual are typically not required to set up a camera purchased from Puruvesi Automation, since the camera comes pre-configured out of the box, and should be used only in situations when access to deep camera settings is required.
troubleshooting/camera_troubleshooting.txt · Last modified: 2021/12/13 16:42 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki