Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_screen_configuration [2019/09/10 15:19] – ivan
+++ mycnc:mycnc_screen_configuration [2019/09/12 11:48] – ivan
@@ Line 566: / Line 566: @@
 ===Items===
-Items are a subset of myCNC actions, and are usually written as item:item-name (such as //item:motion-rapid-speed-xy//). Items are different from actions in that items effectively describe a value that can be changed by some input. In this way, there can exist both an action with some name, and an item with that same name, which are separate from one another.
+Items are a subset of actions, and are written in the following form - item:item-name (such as //item:motion-rapid-speed-xy//). Items are different from actions in that items effectively describe a value that can be changed by some input (similar to Global Variables which store a value). In this way, there can exist both an action with some name, and an item with that same name, which are separate from one another (one will describe an action that will be taken, and the other will describe a value that will be changed by that action).
 Items are often presented to the user on the myCNC software screen to display relevant information which can then be edited (such as the jog overspeed, spindle speed, etc). The relevant actions for such items would be along the lines of motion-overspeed-inc or motion-overspeed-dec, describing a particular action to perform with this item (value).
@@ Line 572: / Line 572: @@
 Items are typically used in conjunction with some input, as outlined in the Connections configuration dialog which can be found [[mycnc:mycnc_configuration_dialogs|here]].
 A list of commonly used items can be found in the [[mycnc:item_list|Item List]].
 === Player actions ===
@@ Line 638: / Line 638: @@
 | editor-ncline-insert | Inserts a line of code |
 | editor-ncline-remove | Deletes the current selected line |
-| editor-font-inc | Increase the font size |
+| editor-font-inc | Increase the font size for the editor G-code text |
-| editor-font-dec | Decrease the font size |
+| editor-font-dec | Decrease the font size for the editor G-code text |
 | editor-numbers-toggle | Toggle the line number display to insert the current line number indicators into G-code |
 | editor-selection-begin | Begin selection |
 | editor-selection-end | End selection (the lines between the editor-selection-begin and editor-selection-end will be selected) |
-| editor-selection-remove | Remove selection |
+| editor-selection-remove | Remove the selected lines |
 | editor-selection-insert | Insert selected lines |
 | editor-new | Create a new program file in the editor |
-| editor-save-as | Save As |
+| editor-save-as | Save File As |
 | editor-save | Save the editor file |
@@ Line 653: / Line 653: @@
 ^ Action Name ^ Description ^
 | save | Saves the file |
-| open | Open file |
+| open | Open selected file |
 | load-file: | Load a file. This will load a file from the predefined folders which can be set in Config > Preferences > Common |
 | load-macro: | A test debug feature. Allows to load the macros which are referenced in the imported G-code directly into the NCList window. In this way, instead of using a single macro number to refer to a specific macro, the full macros will be written out in the NCList.|
@@ Line 761: / Line 761: @@
 | direct-run: | Allows for a direct run of a command from a BDisplay element. This will allow for a direct command which will be executed when a BDisplay element is clicked/pressed. |
 | direct-run-confirm: | Will execute a command directly after a BDisplay element has been clicked AND after the user has confirmed that they want to proceed with the action via a confirmation dialog. |
-| radio-confirm | |
+| radio-confirm | Used for RadioDisplay elements to bring up a popup to ask the user to confirm whether the value should be changed before taking action |
-| mode-cutting-ignore | |
+| mode-cutting-ignore | Ignores cutting commands to simply move over the material to check the machine movement path. Replaced by global variable #7530 in the more recent profiles (1366 series) |
-| mode-cutting-accept | |
+| mode-cutting-accept | Accepts cutting commands from the control program |
-| mdi-save-list | |
+| mdi-save-list | Reserved for a procedure in which a series of commands are entered through the Manual Data Input process, and which are then saved as a command list in a file. Contact myCNC Support for more information on this action. |
-| mode-show-ruler | |
+| mode-show-ruler | Shows a ruler in the visualization window which indicates the 2D part's dimensions (width/length) |
-| mode-show-dimension | |
+| mode-show-dimension | Shows the overall dimensions of the part on the program visualization screen (width/length) |
-| mode-show-workarea | |
+| mode-show-workarea | Shows a box around the program visualization which will denote the work area (useful to see the minimum material dimensions necessary to fit the entire program file in) |
@@ Line 777: / Line 777: @@
 ^ Action Name ^ Description ^
-| system-cmd | Run system command |
+| system-cmd | Run a system command |
 | application-close | Close MyCNC application |
 | application-close-confirm | Run confirmation dialog to Close MyCNC application (will ask the user to confirm via a popup window before closing the application) |
@@ Line 794: / Line 794: @@
 | item-switch: | Used to switch between different values/labels for a certain item (allows to switch between options on a preset list) |
-| run-numpad: | Opens the numpad |
+| run-numpad: | Opens the numpad widget |
 | item: | See [[mycnc:item_list|Common Item List]] for more information. |
@@ Line 816: / Line 816: @@
 | cnc-cutchart-save | Save the current cutting data to the Cutchart |
 | cnc-cutchart-load | Load cutting data for selected Cutting Mode |
-| run-from-here | **Run From Here** command - start job file from selected line |
+| run-from-here | **Run From Here** command - start job from the selected line |