Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_screen_configuration [2020/03/10 09:09] – ivan
+++ mycnc:mycnc_screen_configuration [2020/04/02 15:36] – ivan
@@ Line 531: / Line 531: @@
       * "outputs" - the light is "attached" to an output pin
       * "number" - defines the pin number than the light is attached to. A number can be assigned directly, for example \\ number="0" for pin #0 \\ number="15" for ipn #15 \\ or through pin definition file used in Hardware PLC - "pins.h". In this case sign "#" and the pin name defined in "pins.h" should be instead of pin number. For example \\ **number="#OUTPUT_SPINDLE"** \\ and "pins.h should contain this name definition, for example <code C>#define OUTPUT_SPINDLE 7</code>
+Another example of an xbutton realized with a **ref** value for reference to switch (toggle) a variable between two states:
+<code><gitem where="x-reserv" position="85;5" width="80" height="80"
+ image="rect/normal"
+ image-hovered="rect/hovered"
+ action="cnc-gvariable-switch-5701"
+ xattr="0;0;80;80;led;red;round" name="display-cnc-gvariable-5701" data="---;1;16" ref="16" tooltip="Sheet/tube cutting" images="mode-sheet;mode-tube"
+ type="xbutton"/></code>
+  * **data** specifies which values the switch is occuring (the cnc-gvariable-switch-5701 action in this case)
+  * **ref** specifies the reference value to monitor for
 ++++
@@ Line 721: / Line 733: @@
   * **action** specifies that pressing this button will toggle the x-rotate window visibility
   * **type** is set to "button"
-++++
 Sample code for the rotation2view element:
@@ Line 735: / Line 746: @@
   * **table-rotation** sets the orientation of the table. //-90// and //90// are the typical values to rotate the orientation
   * **type** is set to //rotation2view//
+++++
 ==== MyCNC Actions ====