Differences

This shows you the differences between two versions of the page.

--- quickstart:mycnc-quick-start [2019/04/16 12:17] – ivan
+++ quickstart:mycnc-quick-start [2019/04/16 12:21] – ivan
@@ Line 3: / Line 3: @@
 ===Installing Ubuntu MATE 16.04 through LiveCD with preinstalled myCNC software===
   *The LiveCD image can either be burned onto a DVD, or written on a USB disk through the use of [[https://www.balena.io/etcher/|Etcher]] or [[https://rufus.ie/|Rufus]] software. The LiveCD installation packages can be downloaded [[https://www.pv-automation.com/download|here]].
-  *Connect the power cable, the screen through the HDMI or VGA cable, keyboard, mouse and the LiveCD with Ubuntu Mate 16.04 to the computer
+  *Connect the power cable, the screen through an HDMI or VGA cable, keyboard, mouse and the LiveCD with Ubuntu Mate 16.04 to the computer
-  *When booting up the computer, hold the Delete key to enter the BIOS
+  *When booting up the computer, hold the **Delete** key to enter the BIOS
 {{ :quickstart:bios1.jpg}}
   *In the BIOS screen, navigate to the **Boot** tab
@@ Line 14: / Line 14: @@
   *In the popup window, select the **Install Ubuntu MATE** option
 {{ :quickstart:ubuntu1.jpg}}
-  *Select **Normal Installation**, and check the **Install third-party software** check mark at the bottom of the next screen
+  *Select **Normal Installation**, and check the **Install third-party software** checkmark at the bottom of the next screen
 {{ :quickstart:ubuntu2updates.jpg}}
-  *Select the **Erase disk and install Ubuntu MATE option** if you want to format the Windows partition, leaving only Ubuntu MATE on the computer
+  *Select the **Erase disk and install Ubuntu MATE** option if you want to format the Windows partition, leaving only Ubuntu MATE on the computer
 {{ :quickstart:ubuntu3installationtype.jpg}}
   *Select your timezone
-  *In the //Who are you?// screen, use **mycnc** as the username to access the presets that are applied during the installation of the myCNC software. NOTE: These presets include the **mycnc** user in groups such as dialout (scanners), sudo (security privileges of superuser), and sambashare (SMB/CIFS networking protocol for Windows). These presets are strongly recommended for novice users.
+  *In the //Who are you?// screen, use **mycnc** as the username to access the presets that are applied during the installation. These presets include the **mycnc** user in groups such as dialout (access to scanners), sudo (security privileges of superuser), and sambashare (SMB/CIFS networking protocol for Windows). NOTE: These presets are strongly recommended for novice users.
   *Select the **Log in automatically** option
 {{ :quickstart:ubuntu4whoareyou.jpg}}