Differences

This shows you the differences between two versions of the page.

--- mycnc:mycnc_screen_configuration [2018/10/01 10:42] – skirillov
+++ mycnc:mycnc_screen_configuration [2018/10/01 10:46] – skirillov
@@ Line 71: / Line 71: @@
       * width and height of the led
       * type of light (actually this field is always "led", reserved for future options)
-      * shape of the standard led light. Standard shape can be "round" and "rect"
+      * shape of the standard led light. A standard shape can be "round" and "rect"
   * **address** - defines CNC controller hardware the light attached to
       * "inputs" - the light attached to input pin
       * "outputs" - the light attached to output pin
-      * "number" - defines pin number the light attached to. A number can be assigned directly, for example \\ number="0" for pin #0 \\ number="15" for ipn #15 \\ or through pin definition file used in Hardware PLC - "pins.h". In this case sign "#" and the pin name defined in "pins.h" should be instead of pin number. For example \\ number="#OUTPUT_SPINDLE" \\ and "pins.h should contain this name definition, for example <code C>#define OUTPUT_SPINDLE 7</code>
+      * "number" - defines pin number the light attached to. A number can be assigned directly, for example \\ number="0" for pin #0 \\ number="15" for ipn #15 \\ or through pin definition file used in Hardware PLC - "pins.h". In this case sign "#" and the pin name defined in "pins.h" should be instead of pin number. For example \\ **number="#OUTPUT_SPINDLE"** \\ and "pins.h should contain this name definition, for example <code C>#define OUTPUT_SPINDLE 7</code>