mycnc:touch_screen_calibration_for_tinkerboard_xfce_window_manager
This is an old revision of the document!
Touch Screen Calibration for TinkerBoard SBC
1. Open Konsole (Click on Konsole Desktop shortcut or select Menu → Application → Terminal Emulator)
2. Open Network settings in editor with Administrator permissions. Type in the konsole
sudo mcedit /etc/network/interfaces
and press Enter.
mycnc/touch_screen_calibration_for_tinkerboard_xfce_window_manager.1522522098.txt.gz · Last modified: 2018/03/31 14:48 by skirillov