mycnc:change_ip_address_for_tinkerboard_sbc
This is an old revision of the document!
Change IP Address for TinkerBoard SBC
1. Open Konsole (Click on Konsole Desktop shortcut or select Menu → Application → Terminal Emulator)
2. Open Network settings in editor with Administrator permissions. Type in the konsole
sudo mcedit /etc/network/interfaces
There are 2 IP addresses setup on the Tinkerbboard by default
192.168.1.50 192.168.4.50
Configuration sections are
iface eth0 inet static # address 192.168.0.50 netmask 255.255.255.0 address 192.168.1.50 iface eth0 inet static address 192.168.4.50 netmask 255.255.255.0
Symbol “#” is used as a line comment.
3. Edit Address to fix LAN IP Address as you need. Press F2, Enter keys to save changes. Reboot computer.
We noticed that only the last address is configured if LAN connectir is dicsconnected while computer boot. Laa IP addresses in interfaces configuration file should be setup if LAN connector is connected to Network while boot |
mycnc/change_ip_address_for_tinkerboard_sbc.1522520286.txt.gz · Last modified: 2018/03/31 14:18 by skirillov