User Tools

Site Tools


mycnc:gcodes_list:m23_m24

Thread finishing ON/OFF (M23/M24)

M23 command indicates to the controller to create a chamfer at the end of the thread, which the chamfer thread finishing distance being set up in Settings > Config > Technology > Mill/Lathe.

The M24 command indicates that no chamfer is to be created. Both commands will remain in effect until the other is brought up in the command code.

mycnc/gcodes_list/m23_m24.txt · Last modified: 2019/08/19 11:40 by ivan

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki